Commande minimum - $100 net avant taxes. Our minimum net total order is $100
Preciosa Brooch Project - Rivoli with Pellets
The edging of stones, buttons, cabochons and other central costume jewelry components is one of the most popular procedures in beadworking involving the use of seed beads and fine beads.
Preciosa Ornela presents a tutorial for the creation of a brooch based on the edging
of a Rivoli stone with seed beads and beads from the PRECIOSA Traditional Czech Beads brand.
We also present the new PRECIOSA Pellet™ bead which excellently complements various types of seed beads and beads.
TOOLS and MATERIALS:
|PRECIOSA Twin Beads (32pcs), GBR2H (choose your color)|
|PRECIOSA rocailles GBR10L, size 10/0, GBR6L (groups of 16pcs)|
PRECIOSA Pellet ™ GBPEL6 (16x)
scissors, flat nosed pliers (for flattening the nylon line), a thin needle, a brooch pin, felt, leather or imitation leather, a 0.20 mm nylon line
Alternately string 16 x Twins and 16 x Rocailles 10 (T - R10 - T
- R10 - T - R10…) onto the line in the first row and tie the stringing into a circle. Thread the needle and the line through the second hole of the
nearest Twin and begin the second row (fig. no. 1).
In the second row, add 1x R6 between the second holes of the Twin from the first row.
String a total of 16 x Rocailles 6 (fig. no. 2).
In the third row, add 1 x Twin between each of the R6 from the previous row. Add a total of 16 x Twins.
At the end of the row, thread the needle and the line through the second hole of the nearest Twin (fig. no. 3).
In the fourth row, add Rocaille 10 between the second holes of the T from the previous row.
Once again add a total of 16 x Rocailles 10 (figure no. 4).
Insert the 18 mm Rivoli into the created circle and tighten the stringing of the previous four rows so that the inserted Rivoli is affixed in the
centre of the created circle (fig. no. 5).
Once again add 1 x Twin between each Rocaille 6 from the second row. Add a total of 16 x Twins (fig. no. 6).
Add 1 x Pellet between the second holes of the Twin from the previous row. String a total of 16 x Pellets. (fig. no. 7).
Add 3 x Rocailles 10 between each Pellet from the previous row. Thread the line again through the nearest Pellet at the end of the row. Tighten the stringing of this row and tie it off with a knot. Pull the end of the line into the holes of the nearest seed beads and beads and cut it off (fig. no. 8).
Cut a circle of ca 18 – 20 mm from the felt and firmly sew the brooch pin onto it (fig. no. 9a).
Sew the entire semi-product onto the created brooch (fig. no. 9b).
Cover the felt circle and the metal part with a circle of leather and once again carefully sew them together (fig. no. 9c).